The rich functions of smart locks have made them very popular in recent years. Many owners do not know much about smart locks and occasionally encounter some problems during use. Today, the editor summarizes some common problems and solutions of smart locks.
Most of the fully automatic smart locks use lithium batteries that can be recharged repeatedly, and there is rarely a problem of battery leakage. Semi-automatic smart locks use dry batteries. Due to weather reasons, the battery may leak.
After the battery leaks, it may corrode the battery box or circuit board, causing the door lock to consume power quickly or have no response. To avoid this situation, the battery usage should be checked once after the summer. If the battery is found to be soft or there is a sticky liquid on the surface, a new battery should be replaced immediately.
In summer, due to sweating on the hands or taking sweet things such as watermelon, it is easy for the fingerprint head to be stained, which affects the efficiency of fingerprint recognition, and it often cannot be recognized or difficult to recognize.
At this time, wipe the fingerprint recognition area with a slightly moistened towel, which can basically solve this problem. If the fingerprint recognition area is clean and scratch-free, but it is still difficult to identify, a big reason is the problem of the fingerprint itself. At this time, you need to wipe the fingerprint area on your finger.
3. The password is entered incorrectly and the door lock is locked
Generally speaking, the door lock is triggered after 5 incorrect inputs. But some users reported that they only tried two or three times, and the door lock was locked because of the incorrect input.
In this case, you have to be more careful. It may be that someone has tried to open your door lock when you are away. You should pay attention to whether there are other people around the password lock. It is recommended that you can cover the input with your hand when there are people around when entering the password lock.
4. The door lock does not respond
When the door lock is low on power, it usually makes a "beep" sound to prompt, or it cannot be opened normally after verification. If the power is exhausted, there will be no response. At this time, you can use the outdoor emergency power supply socket and the power bank for emergency power supply to solve the urgent problem. Of course, if there is a mechanical key, the door lock can be opened directly by the key under any circumstances
5. The surface of the smart lock is dull
Wipe the surface of the lock with a clean dry cloth or paper regularly, and never use water, alcohol, acidic substances or other chemical cleaning substances. Never let the lock surface come into contact with corrosive substances, which will damage the protective layer of the lock surface, affect the glossiness of the lock surface or cause surface coating oxidation
Solution: Turn off the power, turn the battery switch to off, and then use the system normally